Anechoic Test Chambers page

Anechoic Test Chambers

Acoustic Testing Facilities

At QuietStar, we provide a complete turnkey service for acoustic testing facilities, including full anechoic test rooms and semi-anechoic test facilities. Our acoustic testing facility design end to end service starts from the initial design overview and concept, then to manufacture, delivery, installation, final testing and finally commissioning of the acoustic test facility.

We work with you to understand your needs and our comprehensive service means we deliver the optimum acoustic test facility for you, by designing a building which is fit for purpose, utilises the available space effectively and performs to your specified criteria.


With over 60 years combined experience in designing and installing acoustic test facilities, we have extensive industry relationships. We work closely with some of the best product suppliers globally and international dynamometer companies, ensuring you the highest quality acoustic testing facilities on the market. 

We provide this service to clients across a broad range of industries, including colleges, universities and research groups, and the automotive industry. You can read more about our industry specific examples on our blog

Want To Know How We Can Support Your Acoustic Testing?

Automotive Acoustic Testing Facilities

Automotive anechoic and hemi-anechoic acoustic test facilities are typically used for Noise Vibration and Harshness (NVH) and pass-by road simulation tests. NVH test chambers, also referred to as vehicle semi-anechoic chambers (or VSAC), are ideal for the measurement of inner and outer noise and vibration of a car with 2WD or 4WD, typically during run-up and coast down and at constant speeds, including the measurement of intake and exhaust systems, engine compartment, cabin noise, steering wheel and seat rail vibrations, tyre noise and powertrain mounting systems.

VSAC test chambers are perfect for analysing rolling noise and tyre noise measurements, road surface simulations (smooth and rough tarmac, Belgium blocks and rumble strips). As well as this, these performance testing rooms are used for road load simulation, different wheel speed simulation, curve driving, noise path analysis from individual wheels, differential gear tests, measurement of engine power characteristics, measurement of the acoustic power level of other components (starter motors, alternators, wipers etc), all according to ISO 3745.

Our automotive audio testing facilities are also ideal should you wish to carry out measurements of powertrain mountings (engine vibration, vibration transfer across the mounts, mount disconnection), noise source location (acoustic intensity beamforming), operational deflection shapes identification, structure-borne transfer path analysis from powertrain mounts and other components and measurement of engine power characteristics.

For an industry standard low cut-off frequency of 50Hz, we normally suggest a minimum room size of 10.0m wide x 17.0m long x 5.0m high, wedge tip to wedge tip. This roughly equates to an inside concrete chamber size of approximately 13.0m wide x 20.0m long x 6.5m high.

The Acoustic Testing Facility You’re Looking For

All of our acoustic testing facilities comply with ISO 3745 and ISO 26101 for standard sound power measurements.

From computer components to large diesel engines and generators, we are able to design and supply a solution, providing a fully certified acoustic testing facility. From supplying acoustic lining packages, to a fully equipped test facility, we can provide a cost effective solution to your testing requirements.

Contact Us